要求報價
（英）微機定硫儀 Microcomputer Sulfur Tester
- 型 號：
- 類 別：定硫儀(測硫儀)系列
- 產 地：鶴壁市
更新時間：2025-01-13
點擊次數：2243次
微機定硫儀整個測試過程由微機控制自動完成，也可脫離微機工作；實驗過程中校正方便，直觀。測量結果可長期保存，可查詢、打印。
)
★整個測試過程由微機控制自動完成，也可脫離微機工作。
★The whole test process is controlled by a microcomputer and completed automatically, or separated from the microcomputer to work.
★實驗過程中校正方便，直觀。
★The test process can be calibrated conveniently and intuitionally.
★測量結果可長期保存，可查詢、打印。
★Test results can be inquired, printed and stored for a long time.
★系統工作溫度用戶可通過軟件在600℃----1150℃之間選擇設定（測煤時為1050℃，測石油時用戶可選擇800℃）。
★Working temperature of the system can be set by the user and selected via a software at 600-1150℃ (1050℃ for the coal and 800℃ for the petroleum).
★微機與單片機系統之間采用標準RS232串行接口，具有接線簡單、傳輸可靠、傳輸距離遠、故障率低等特點。
★A standard RS232 serial interface is adopted between the microcomputer and singlechip, realizing simple connection, reliable transmission, far transmission distance and low failure rate, etc.
參數：
Parameters：
★硫的測量范圍：0~30% 。
★Test range of sulfur: 0-30%;
★載氣流量：1000ml/min 。
★Carrier gas flow: 1000ml/min;
★測硫時間：3—9min，微機自動判斷控制。
★Test time: 3-9 min with automatic decision and control of microcomputer;
★升溫速度：20~45min。
★Heating rate: 20-45 min;
★電源要求：?jiǎn)蜗嘟涣麟妷簙220V 50Hz, 功率 2KW 。
★Power supply: Single-phase three-phase AC voltage 220V 50Hz, power 2KW;
★準確度：符合國標GB/T214-2007。
★Accuracy: Conforming to international GB/T214-2007
.png)
